DJI PHANTOM 4 RTK

The Phantom 4 RTk is the most compact and accurate rotary UAV for low altitude mapping solution.

Product Number: CP.PT.000488-RTK

Qty:

What’s New

  • Added the 3D Photogrammetry (Multi-oriented) operation type. After planning the operation area, the generated flight routes will include a single orthographic flight route and four oblique flight routes.
  • Added the Terrain Awareness Mode operation type. To plan a Terrain Awareness operation, create a folder in the DJI/DSM path in the root directory of the microSD card, put tif and tfw files into it, and then import the files to the app. After planning flight route in the area corresponding to be imported files, the aircraft will follow the terrain when flying along the route.
  • Added notifications for abnormal Intelligent Flight level. If the abnormal battery level is detected, there will be a prompt in the app and RTH will be triggered.
  • Optimized the flight route planning for Linear Flight operations. Enable or disable “Flight route generated along center line” in the settings to determine whether the generated flight route will include the center line added when planning operation.

 

Next Generation Mapping

1cm+1ppm
RTK Horizontal Positioning Accuracy
1.5cm+1ppm
RTK Vertical Positioning Accuracy
 5cm*
(*When flying at 100m height,
2.7cm GSD, sunny.)

Absolute Horizontal Accuracy
of Photogrammetric Models

Key Features

RTK Module

1″ CMOS Sensor

GS RTK APP

Time Sync

OcuSync

D-RTK 2 GNSS Mobile Station

Centimeter Level Positioning System

A new RTK module is integrated directly into the Phantom 4 RTK, providing real-time, centimeter-level positioning data for improved absolute accuracy on image metadata. Sitting just beneath the RTK receiver is a redundant GNSS module, installed to maintain flight stability in signal-poor regions such as dense cities. Combining both modules, the Phantom 4 RTK can optimize flight safety while ensuring the most precise data is captured for involved surveying, mapping and inspection workflows.

Fit the Phantom 4 RTK to any workflow, with the ability to connect this positioning system to the D-RTK 2 Mobile Station, NTRIP (Network Transport of RTCM via Internet Protocol) using a 4G dongle or WiFi hotspot, or store the satellite observation data to be used for Post Processed Kinematics (PPK).

Gather Accurate Data with TimeSync

Capture the best image data with a 1-inch, 20 megapixel CMOS sensor. The mechanical shutter makes mapping missions or regular data capture seamless as the Phantom 4 RTK can move while taking pictures without the risk of rolling shutter blur. Due to the high resolution, the Phantom 4 RTK can achieve a Ground Sample Distance (GSD) of 2.74 cm at 100 meters flight altitude.  Every single camera lens goes through a rigorous calibration process where radial and tangential lens distortions are measured to ensure each Phantom 4 RTK offers unparalleled accuracy. The distortion parameters gathered are saved into each image’s metadata, letting post-processing software adjust uniquely for every user.

Precise Imaging System

Capture the best image data with a 1-inch, 20 megapixel CMOS sensor. The mechanical shutter makes mapping missions or regular data capture seamless as the Phantom 4 RTK can move while taking pictures without the risk of rolling shutter blur. Due to the high resolution, the Phantom 4 RTK can achieve a Ground Sample Distance (GSD) of 2.74 cm at 100 meters flight altitude.  Every single camera lens goes through a rigorous calibration process where radial and tangential lens distortions are measured to ensure each Phantom 4 RTK offers unparalleled accuracy. The distortion parameters gathered are saved into each image’s metadata, letting post-processing software adjust uniquely for every user.

 

Purpose-Built Flight Planning Application

A new GS RTK app allows pilots to intelligently control their Phantom 4 RTK, with two planning modes – Photogrammetry and Waypoint Flight – alongside a more traditional flight mode. The planning modes let pilots select the drone’s flight path while adjusting overlap rate, altitude, speed, camera parameters and more, offering an automated mapping or inspection workflow.

The GS RTK app has been built with its users in mind and therefore has a range of features made for specific mapping or inspection workflows. The app has implemented direct loading of KML area files for in-office flight planning, a new shutter priority mode to keep exposure consistent across all photos and a high wind alarm to warn pilots of adverse conditions.

 

Mobile SDK Supported

The Phantom 4RTK is compatible with the DJI Mobile SDK, opening up its function and customization through a mobile device.

OcuSync Transmission System

Enjoy stable and reliable HD image and video transmission at distances of up to 7 km, great for mapping more significant sites.

*Unobstructed, free of interference, when FCC compliant. Maximum flight range specification is a proxy for radio link strength and resilience. Always fly your drone within visual line of sight unless otherwise permitted.

 

 

Seamless Compatibility with D-RTK 2 Mobile Station

Support your Phantom 4 RTK missions with the D-RTK 2 Mobile Station – providing real-time differential data to the drone and forming an accurate surveying solution. The Mobile Station’s rugged design and OcuSync 2.0 transmission system ensure you can gain centimetre-level accurate data with your Phantom 4 RTK in any condition.

 

Start Mapping Today

With a built-in flight planning app (GS RTK) and an easy method to collect RTK data (RTK Network or D-RTK 2 Mobile Station), pilots have a full solution for any surveying, mapping or inspection workflow – right out of the box.]

 

Share this post: Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Share on LinkedIn
Linkedin