Software & Firmware Updates

Below you will find software and firmware updates for your equipment. Please note that links will be removed one year after initial posting. If you need more information or think something is missing please contact us.


WingtraOne Firmware Updates

October 10, 2019 – WingtraPilot and WingtraOne 1.10 Release

August 22, 2019 – Wingtra Release 1.9.5

May 16, 2019 – Wingtra Release 1.9.4

April 2019 – WingtraPilot & WingtraOne 1.9.3


DJI Firmware Updates

September 23, 2019 – New version of  M210 RTK V2 + X7

Upgrade Method for DJI M210 RTK V2 + X7

  • Download and install DJI Assistant 2
  • Connect your aircraft/remote control to your computer
  • Open DJI Assistant 2
  • Upgrade the following to the latest firmware versions:
Aircraft Firmware:v01.00.0590
Remote Controller Firmware:v01.00.0590
D-RTK 2 Mobile Station for Matrice Series Firmware:v01.00.0590
DJI Pilot App:v1.5.0
DJI Assistant 2 For Matrice:Windows v2.0.8, Mac v2.0.8


What’s New?

Aircraft:

  When using the X7 camera:

– Added the photo ratio of 3:2 and a mechanic shutter option. *

– The photos captured in each flight mission are saved to a subfolder under the “survey” folder in the microSD card.

  Added lens calibration in manual focus mode when using the X5S or X7 cameras.

  Added a function to adjust the shutter, aperture, and ISO values using the camera setting dial and corresponding buttons on the remote controller when using the X4S, X5S, or X7 cameras.

  Reduced camera display jitter when flying with the X5S and a zoom lens, such as Olympus 14-42 mm or Panasonic Lumix 14-42 mm.

  Reduced aircraft fan noise when taking off in the simulator in DJI Assistant 2.

  Fixed the abnormal aircraft status when taking off with the Downward Vision System obstructed.

  Fixed the issue where the RTH altitude could not be set to the max value after GEO zones have been unlocked.

  Fixed the rare issue where there was no camera preview in the app when using a PSDK payload.

  Fixed the issue where calibration failed after the GPS interfered when using the M210 V2 with an external GPS kit.

  For the M210 RTK V2:

– Improved mapping accuracy when using the X7 camera with a 35 mm lens or 24 mm lens.

– The PPK raw data will be saved to the same folder as the photos.

– Added the detailed RTK status information in the photo information.

Remote Controller:

  Added function to disable the gimbal control using the left and right dials on the remote controller during mission flight to avoid false trigger.

  Added a function to transfer the PSDK data to a display device via HDMI.

  Added a function to customize the control stick mode for the Secondary remote controller in Dual Remote Controller mode. *

  Added a function to focus in manual focus mode by using the focus adjustment knob. *

  Added a function to recenter the gimbal pan. Tap the corresponding button in gimbal settings in the app to recenter, only the gimbal pan. *

D-RTK 2 Mobile Station for Matrice Series:

  Added a data copy function. Connect the D-RTK 2 to the computer to copy the RTCM data directly.

Notes:
· Make sure that the firmware for the aircraft, remote controller, and D-RTK 2 Mobile Station for Matrice series (if in use) is up-to-date.
  Otherwise, they will not work together.
· To update the firmware for Zenmuse X4S, X5S or X7, connect it to Gimbal Connector I.
· Download the firmware to a microSD card to update the firmware for Zenmuse Z30, XT or XT2.

* DJI Pilot app of v1.5.0 or later is required.


September 17, 2019 – New version of Phantom RTK

Upgrade Method for DJI Phantom 4 RTK

  • Download and install DJI Assistant 2
  • Connect your aircraft/remote control to your computer
  • Open DJI Assistant 2
  • Upgrade the following to the latest firmware versions:
Aircraft Firmware:v02.02.0011
Phantom 4 RTK Remote Controller:v02.02.0014
Phantom 4 RTK (SDK) Remote Controller:v02.02.0011
D-RTK 2 Mobile Station Firmware:v02.02.0014
DJI GS RTK App:v2.1.1
DJI Assistant 2 For Phantom: v2.0.7
DJI Assistant 2 For MG:v2.0.13


What’s New?

  Added a Block Segmentation function to divide large mapping areas into multiple missions that can be executed using single aircraft or multi-aircraft in Multi-Aircraft Control mode.

  Added altitude optimization for orthogonal operations. When enabled in the app, the aircraft will fly to the center of the operation area to collect a set of oblique images after the flight to optimize the altitude accuracy.

  Added multiple flight modes (for Japan only). When enabled in the aircraft settings in the app, users can switch the flight mode using the flight mode switch on the remote controller. The P and F positions on the remote controller are for P-mode, and the A position is for A-mode.

  D-RTK 2 High Precision GNSS Mobile Station can now be used as an RTK rover.

  Added Cloud PPK Service to provide high precision positioning computation (for Europe only, Russia excluded). Users can upload satellite observations files and raw PPK files to the cloud server for post processing and view the results of the PPK calculation.

  Added aircraft altitude comparison in Multi-Aircraft Control mode to optimize obstacle sensing among multiple aircraft. When the altitude difference between aircraft is more than 5 m, criss-cross flight is supported.

  Added a data copy function to the D-RTK 2 Mobile Station. Connect the D-RTK 2 Mobile Station to the computer to copy the PPK data directly.

  Optimized Waypoint operations. When RTK is enabled and it is working properly, users can choose to perform missions using an absolute altitude. Users can select between absolute altitude and relative altitude when starting the mission.

  Optimized UI for Terrain Awareness mode.

  Adjusted the restricted zones for country borders to improve the accuracy of the flight limits.

  Fixed the issue where the Network RTK was unstable in some regions when using a Huawei dongle.

  Fixed the issue where new firmware could not be downloaded in the DJI GS RTK app. When using an old version of the app, this issue can be fixed by: going to the main screen, tapping Menu, then Settings, Apply to All, Explorer, Internal Memory, and entering the path DJI\firm to delete the old firmware file.

Note: After updating this firmware for the Phantom 4 RTK Remote Controller, the remote controller can only be used with the Phantom 4 RTK aircraft. The firmware for the Phantom 4 RTK Remote Controller and D-RTK 2 Mobile Station can only be updated using the DJI GS RTK app. Make sure that the firmware for the aircraft, remote controller and D-RTK 2 Mobile Station is all up-to-date. Otherwise, they will not work together. Using this firmware with a version of DJI Terra older than v1.2.0. is not recommended, as some functions will not work properly.



May 9, 2019 – Latest Firmware version for DJI Phantom 4 RTK V 02.01.0009

Upgrade Method for DJI Phantom 4 RTK

  • Download and install DJI Assistant 2
  • Connect your aircraft/remote control to your computer
  • Open DJI Assistant 2
  • Upgrade the aircraft and remote controller firmware to V 02.01.0009


May 16, 2019 – Latest Firmware version for Mavic 2 Enterprise Series v01.01.0400

Upgrade Method for DJI Mavic 2 Enterprise

  • Download and install DJI Assistant 2 for Mavic
  • Connect your aircraft/remote control to your computer
  • Open DJI Assistant 2
  • Upgrade the aircraft and remote controller firmware to V 01.01.0400


S800A Firmware Update

December 19, 2018 – Latest Firmware version for S800A v1.30, click to download:


S900A Firmware Update

December 5, 2018 – Latest Firmware version for S900A v1.1 click to download: